Fabric Profiles

Fabric Profiles are the tension fabric holders of the system. These profiles are typically used as independent, tension fabric frames that display graphic images.

FP 1G 01

1-1/4″ x 1-3/4″ Fabric profile with one gasket channel at 90 degree.

FP 1G 02

1-1/2″ x 1-3/4″ Fabric profile with one gasket channel at 90 degree.

FP 2G 02

3″ x  1-3/4″ Fabric profile with two gasket channels at 180 degree increments.

FP 2G 03

3″ x 1-3/4″ Fabric Profile with two gasket channels at 180 degree increments.

FP 2G 04

1-3/4″ x 1-3/4″ Fabric profile with two gasket channels at 180 degree increments.

FP 2G 05

1-3/4″ x 1-3/4″ Fabric profile with two gasket channels at 180 degree increments.

FP 2G 06

3″ x 1-3/4″ Fabric profile with two gasket channels at 180 degree increments.
This product has been discontinued with limited quantities available. Contact us for a new solution.

FP 2G 07

1-3/4″ x 3″ Fabric profile with two gasket channels at 180 degree increments. 
This product has been discontinued with limited quantities available. Contact us for a new solution.

FP 2G 08

1-3/4″ x 1-1/2″ Fabric profile with two gasket channels at 180 degree increments and filleted face.

FP 2G 10

4-1/4″ x 1-3/4″ Fabric profile with two gasket channels.

FP 2G 11

4-1/4″ x 1-3/4″ Fabric profile with two gasket channels.

FP 4G 02

1-3/4″ x 1-3/4″ Fabric profile with four gasket channels at 90 degree increments.
This product has been discontinued with limited quantities available. Contact us for a new solution.